**Please Do Not Post until i declare the thread to be open**

Here is a step-by-step tutorial that i am hoping will help out a few ppl in their pursuit of an effective stealth grow.

Step 1: Acquire a suitable cabinet. This Cabinet i rescued that my friend was throwing in the bin.. (The Rabbit was already here).



Step 2: Gather all the items you will need to add to your cabinet. In mine i added:
- CFLs.
- 2 PC Fans & Transformer to run them.
- Roll of Mylar to add to the Walls, Floor & Ceiling.
- A 4-Way Power Board.
- Assorted clips and screws.



Now we can go about installing these items into our cabinet

__________________
XxNinjaxX's Super Lemon Haze - LST + Pics
XxNinjaxX's Afghan Kush X White Widow

First thing first - the Mylar Lining needs to go in:


I found it best to measure it up prior to sticking it in and cutting after, as that got messy.
It is stuck to the wall using the Blue plumbers glue available at any hardware.



This is what yours should look like at this stage. Be sure to cover as much of the surface as possible.

__________________
XxNinjaxX's Super Lemon Haze - LST + Pics
XxNinjaxX's Afghan Kush X White Widow

After this i wired up my fans to the transformer to run them. and after finding out their direction of airflow, i placed one in each corner. One for air intake, and one for air extraction.



These little fans are super quiet, and use next to nothing in power, so they are very suited to this type of growing operation.

__________________
XxNinjaxX's Super Lemon Haze - LST + Pics
XxNinjaxX's Afghan Kush X White Widow

As we all know: Clones and Seedlings require warmth in order to establish a good root system, so i went to the liberty of giving my babies a Heat Pad

__________________
XxNinjaxX's Super Lemon Haze - LST + Pics
XxNinjaxX's Afghan Kush X White Widow

nice bunny, i have 5 right now myself,. 2 new zealand, 1 flemmish giant, and 2 of their 50/50 babies

__________________
you know i think instead of re marriage, i'll just find some woman who hates me and buy her a house!

These are the Fluros i included in Step one, i attached them via a chain that i screwed into the roof.





I decided not to use these lights as i wanted something with a little more 'Oomph'.
..Thought i would include the step anyway as it may help someone..

__________________
XxNinjaxX's Super Lemon Haze - LST + Pics
XxNinjaxX's Afghan Kush X White Widow

Here is the 135W 5600K CFL i decided to use.
Any Socket holder will do the job. Here is the placed vertically with chains affixed to keep it upright.

__________________
XxNinjaxX's Super Lemon Haze - LST + Pics
XxNinjaxX's Afghan Kush X White Widow

This is the final light setup that i settled on.
The 135W CFL, into a horizontal Lamp holder.
I removed the reflector as it was not able to fit into the cupboard.
The light holder is screwed directly into the roof.

__________________
XxNinjaxX's Super Lemon Haze - LST + Pics
XxNinjaxX's Afghan Kush X White Widow

Next step is possibly the most fun
Loading in the plants!!

__________________
XxNinjaxX's Super Lemon Haze - LST + Pics
XxNinjaxX's Afghan Kush X White Widow

After this was done, i went through and made it a lil more stealth.
I ran the wires through the roof into the open compartment, through a special hole i cut:

__________________
XxNinjaxX's Super Lemon Haze - LST + Pics
XxNinjaxX's Afghan Kush X White Widow