WHAT YOU'LL NEED:

• 1 foot and 2 feet pieces of plexiglass pipe, about 3 inches in diameter. You will have to make a "Y" shape splitting off from the main pipe at a 45° angle. You will need plastic epoxy!
• An aluminum or brass stem thread on one end (the thread to the valve has to attach to the stem).
• A threaded brass valve that closes in half a turn.
• A bowl that matches the threads on the valve.
• A drill with a drill bit as big as the stem.
• A cap from an aerosol can that will fit in the end of the short Y off the main pipe, just tight enough to close it off.
• One foot of rope or bungee cord.
• Silicone caulk

HOW IT WORKS:
Not quite as simple as a standard bong. The carburetor is the big pipe splitting off at 45°. This allows a LARGE amount of smoke to blast into your lungs VERY suddenly! The process is like this.
1. Light up.
2. Start smoking.
3. Close the valve (this cuts off all incoming air).
4. YANK the cord attached to the plastic aerosol top.
This causes a ton of smoke to go into your lungs instantly.

5. Pass out.

Why would this work better than a normal carborator? In other words, how is faster smoke in the lungs gong to get you higher? The same amount of THC is being delivered in each case.

This is what i was thinking, however ive heard that thc burns on contact with the flame and is absorbed as soon as it reaches your lungs, so maybe the quicker it reaches ya lungs the less thc lost.

i dont know im pretty baked right now and anything could be possible in my mind right now lol

peace

__________________
if this post made your inner child giggle...rep me
Weed Isn't An Addiction - Its A Hobby

sounds like instead of pull carb, its a huge hole for a carb, like a graffix bong, but instead of a carb hole as round as a pencil, it is as wide as an arosaul can.

Whatever happened to Mogie? She did a lot for this site. She don't come on here anymore?

__________________
"The world is yours and everything in it. It's out there. Get on your grind and get it."- Young Jeezy

but thats prety retarded. the quickness of smoke hitting your lungs has nothing to do with getting high. no offense there was alot of thought/work put in this but come on....plastic?....Metal bowl peice?..... havent we goten past that yet.

maybe its called 'death' because you are using aluminum foil, aluminum piping, fiberglass and silicon.

i would be serious wary of taking hoots out of anything using those materials.

great idea... you know what else is cool.... a blunt..

hurts less, less assembly... meh

__________________
Jackie Treehorn... treats objects... like women... man..

Seriously, I'd rather puff on a joint than smoke outta that =P

Boo, great idea Mogie.....a 6 ft bong does the trick alll the same...But awesome idea