Guys I found good directions for a homemade vaporizer. Check it out and tell me what you think. Put it under homemade pipes. I really appreciate your feedback on this. When I got bad feedback on some pipes posted a long time ago i pulled them. So I really do read and care about what you say.

there is no link man

yeah that's pretty cool mogie

__________________
EVERYTHING THAT I SAY HERE IS COMPLETELY FALSE AND THE ONLY REASON I SAY THESE THINGS IS SO I CAN SOUND COOL.

This is what Mogie was talkin bout:
http://www.rollitup.org/view.php?pg=...article&id=560
Looks cool.

mogie, here's a somewhat more refined version of the old soldering iron vapouriser.

I built this one in Jan, 2000.



Calibrated the dial with an electronic thermometer.



Here's the airflow diagram. Pardon the shonky art, that was 7 years ago and I'm a bit better at photoshop now!



This vapouriser is the same as the one you linked, but things are mounted a bit more solidly and temp can be controlled.

Built on a cast aluminum project box. A soldering iron element is bolted to the top of the box through a steel pickle jar lid with common hardware. An incandescent light dimmer is used to vary the temp of the element. The cone/bowl is a stainless steel thimble with a hole drilled in it, bolted to the end of the iron element. The 'dome' is a pickle jar. A length of 10mm dia tubing is used to draw the vapour. Rubber feet are needed as air intake holes are on the bottom of the box.

I actually still have this thing somewhere, but never liked using it much.

__________________
Get a harvest every 2 weeks - A batch of clones in rockwool - Al B. Gone

that looks pretty good ima havta try that. do u hav anyother home made vapos if u do post them please

__________________
In Weed We Trust. Legalize Today. Weed was put on the Earth by God for Men so we could get HIGH.

I saw one where it was made out of a light bulb and you just used a lighter to heat up the glass. You basically removed the filament while keeping the metal screw end on and jimmy-rigged a mouthpiece onto the metal screw piece. Never tried it, but that was about as cheap as you could get.

__________________
My avatar is indicative of my experience.

Take a live look at me killing every plant I start!
http://www.rollitup.org/grow-journal...tml#post147628

yeah i saw that one two i made it but never got around to using it

__________________
In Weed We Trust. Legalize Today. Weed was put on the Earth by God for Men so we could get HIGH.

Nice design Al.

there are better i personally like homemade pipes or s made out of fruit

__________________
In Weed We Trust. Legalize Today. Weed was put on the Earth by God for Men so we could get HIGH.