Results 1 to 9 of 9
CFL / Fluorescent Lighting

How would these do?

in the

Indoor Growing

forums; http://4hydroponics.com/mobile/item....=mogulCordBulb Or just the cord and aa better light, cause the cord alone is around 15 bucks. I was thinking ...
  1. #1
    Ganja Smoker Pot Head
    Join Date
    Jan 2012

    Location
    G-town, AZ
    Posts
    260

    Default How would these do?

    http://4hydroponics.com/mobile/item....=mogulCordBulb

    Or just the cord and aa better light, cause the cord alone is around 15 bucks. I was thinking of getting like two to three of these and have a decent veg hood. Would these have a good enought kick or is there a better bang for my buck out there? And for veg I'm doing cfls or T5's. I just have 8 26watt 65K lights and would use those as well as the big lights. Any thoughts?

  2. #2
    HSA
    HSA is offline
    Stoner Stoner
    Join Date
    Sep 2009

    Posts
    935

    Default

    Bleezyboy: Let me start out by admitting that I'm a T-5 fan. I grow meds only for my self in a 2' by 4' tent and I use T-5's from seed sprouting all the way to harvest. Just make sure that you buy a big enough fixture to completely cover your grow, and that's very important. T-5's burn cool enough that you can put them a few inches off the tops of your plants without cooking them and they're pretty cheap to run. A T-5 set up is usually neater with everything tucked into a single reflective fixture being fed by a single cord. A four tube rack four feet long will adequately illuminate a single line of four plants. I also think how you use your lights has a lot to do with how successful you'll be.

    I start out with 5,000K lamps on a progressive light schedule that has the lights on for 20 hours a day and off for four hours during the first week. At the end of each week I drop the light by one hour until we're down to ten on and fourteen off. I flower at that photo period until harvest but don't be surprised if at around 14 to 13 hours of light you start to see evidence of preflowering. At that point I switch over from my vegging formula to my flowering nutes.

    I think it's only fair to admit that for the last five years or so I've used Technaflora's, "Recipe for Success," exclusively and I haven't had any of the nutes problems that you read about here and at other forums. All you need is good water, a set of measuring spoons and something to check an adjust pH with. I hope this helps. HSA

  3. #3
    Ganja Smoker Pot Head
    Join Date
    Jan 2012

    Location
    G-town, AZ
    Posts
    260

    Default

    Yeah it does! I really want a T5 set up but I've heard they don't have good penetration. I'm gonna check out your grow to see if I can do that. thanks!

  4. #4
    Teaching How To Roll Mr. Ganja Hugo Phurst's Avatar
    Join Date
    Mar 2012

    Posts
    1,397

    Default

    For vegging I made a simple CFL set up.
    2 cheap ass vanity mirror light fixtures (4 socket), and a 24in length of 8in vent (reflector).
    8, 23w CFL bulbs. 6, 6500K and 2, 2700K (a 3:1 ratio gives a fuller spectrum).

    Parts and bulbs came to less than $100 for 184W & over 12,000 lumens

  5. #5
    Ganja Smoker Pot Head
    Join Date
    Jan 2012

    Location
    G-town, AZ
    Posts
    260

    Default

    That's awesome! I wanted to do tht but my family friend does good wood work so he's building me a hood. I want big and small cause the bigger cfls have better penetrating power. I like a vanity fixture with some big clfs mixed in tho!

  6. #6
    Ganja Smoker Pot Head
    Join Date
    Jan 2012

    Location
    G-town, AZ
    Posts
    260

    Default

    Does anyone have any input about these particular lights I gave links to?

  7. #7
    HSA
    HSA is offline
    Stoner Stoner
    Join Date
    Sep 2009

    Posts
    935

    Default

    Quote Originally Posted by Bleezyboy1990 View Post
    Yeah it does! I really want a T5 set up but I've heard they don't have good penetration. I'm gonna check out your grow to see if I can do that. thanks!
    Bleezyboy: so far that hasn't been a problem. The manufacturer's or both of my fixtures, (different brands), recommend a height of 6" to 1' off the tops of my plants but using the back of the hand method I have adjusted them to as little a a couple of inches off the tops of my plants without a problem.

  8. #8
    Stoner Stoner lilrich11's Avatar
    Join Date
    Dec 2011

    Location
    In The Freezin Cold
    Posts
    793
    Journal Entries
    7

    Default

    I just went to the hardware store and wires up my own, pig tail light sockets, a couple of electrical boxes and a thick guage extension cord. Did it myself it was cheap and can handle any cfl. Pics of my box and lighting i made are in my sig, take look if you want. But the one you picked should be fine, a bit expensive imo.

  9. #9
    Ganja Smoker Pot Head
    Join Date
    Jan 2012

    Location
    G-town, AZ
    Posts
    260

    Default

    Yeah? The cord alone is like 11 bucks, do the big cfls use a different base or same as the lil cfls? But yeah I actually wired my setup now but its only four sockets. I'm gonna check out your stuff too tho. Always need new ideas

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •