A group of my projects.
Originally Posted by Danielsgb I got the inside shelves removed from the doors. I'm gonna replace it with white plastic of some type (haven't figured it out yet) to gain space. Any recommendations on if I should take that insulation under that black felt out? I'm not sure on that yet. If it would leak heat, cool but if it makes a mess/pain in the ass I'll leave it. The rubber seal on the doors survived pretty well. The door shelves were plastic, so a pair of shears and patience did it. Daniels
Originally Posted by Danielsgb Well I'm back at it again. I am going to try building a grow box out of a refrigerator. I tried one many years ago when I did my first couple grows ops. Ran out of time,$ and space, then moved. I'm starting this for ideas and comments for the build. I'll start a Grow journal or add it into my current journal (http://www.rollitup.org/grow-journal...here-goes.html) when I get it finished. I have a girl that needs adopting. I found a 150W Security Light that I bought many ...
Originally Posted by Danielsgb Here's my DIY aero-cloner. Bubble wands and a heater w/ thermometer are hot glued in. It was made for 16 originally, but I converted it to 8 as that is enough (16 was too crowded). I put plain water with a little Super-thrive and change it every couple days. I've been running it at 15 min. on 30 min. off. The temp's been around 80. I have a dome on them and I've had a good success rate on the 3 times I've used it. Hopefully the 4th will be a 100% rate. How that sound for the 15/30 min timing? ...
Go to Profile
Mark as Read
