Stelthy's 600W Hps Project! (New-Cab)

Then I covered the stapled area's with silver duct-tape, to hold the tabs in place and to tidy the underside of the shelf - STELTHY

And there we go a nice covered grow shelf, where the holes are, they've created ripples but I;ll do my best to lose them I'll do that later - STELTHY

nice cab stelth. always wanted to do something like this but always hear you get better and higher yields with good open space

You can clearly see the ripples, I pushed the ripples towards the center and staples them from both sides I'll sort that out at some point - STELTHY

The 3 125mm CPU fans are currently laying on top of the shelf at the mo, but will be mounted on the under side, and each port hole will be lined with silver tape for a better finish - STELTHY

There we go I've made all those ripples turn in to one straight line, I plan to splice the middle together for a more perfect finish, I'll do this another day - STELTHY

I installed 2x 120w electric bar heater's, I may have to move these later as am unsure of the amount of space the light, fan and ducting will take up but for now everything looks good STELTHY

The bar heater's will be connected to a seperate thermostat so during lights off if temps drop more than a couple of degree's below 26oC then the bars will re-heat the grow space untill 26oC is achieved STELTHY