Stelthy's 600W Hps Project! (New-Cab)

**stelthy** · 07-24-2010, 06:57 AM

Ok so this is how its looking now with the ballasts in place.. however I want to elevate them to allow sufficient air flow once I add fans to each compartment in the not so distant future

so... - STELTHY

**stelthy** · 07-24-2010, 07:01 AM

I bought some nuts and bolts and some small washers from my local hardware store .. I placed the bolts in the holes I had drilled from the under each shelf.. and placed a series of nuts and washer's on each bolt to elevate the ballasts .. - STELTHY

**stelthy** · 07-24-2010, 07:05 AM

Elevated

gotta get some fans yet before this sections done completely but that's all that's left to do on this section

- STELTHY

**stelthy** · 07-24-2010, 07:11 AM

Next I knabbed some insulated foam tape from my mate, who works installing AC units... don't worry he'll come into play again later when I mod the loft etc

but for now as it was surgested to me a while ago on this thread I should use foam etc to keep vibration's from the in-line fan etc to a bare minimal.. - STELTHY

**stelthy** · 07-24-2010, 07:14 AM

I removed the block on which I had the in-line fan sitting on, sprayed it black.. and added a strip of the insulated foam to both the top and the under-side and replaced it and fastened it in place again with long bolts etc..

- STELTHY

**stelthy** · 07-24-2010, 07:21 AM

I measured the back of the wall mountable stereo and used an off cut as a backing I sprayed it... black

.. and then screwed in some small 'L' brackets, a anti- vibration strip and some smaller front face 'L' brackets as support ... - STELTHY

**stelthy** · 07-24-2010, 07:26 AM

And here's the bad boy stereo in place... I will prob. make a mounting shelf for the CCTV monitor next, finish my wiring (still) and then make the coffin/box for the top section, I am off out to BBQ for some home made blunts and a swap meat style do, I gotta enjoy the sun whilst we have it

, more updates coming soon - STELTHY

**Integra21** · 07-24-2010, 10:04 AM

Every time I see it it just keeps looking better and better. Cant wait to see this bitchin cabinet finished. Top quality work as always Stealthy.

**StonedBlownSkiller** · 07-24-2010, 10:11 AM

looks fuckin rad man. always outshining the brightest stars.....lol

**MuppetMan1989** · 07-24-2010, 11:48 AM

stelthy you are a saint sent by the grow cab goddess to help us in need of weed. Good Job man!
I just recently started my Grow cab and have been following along with your thread., It's small enough for 3, 5 gal pots. and a 400 watt hps.
So far I've got everything in place, and were i want it to be. now it's just time to put in the labor hours and installing all the fans and carbon filter ect.
What did you use to cut exact holes? what type of drill did you use?