What's The Craziest Homemade Bong You've Ever Made?

Tre_Jay

Active Member
Not too long ago someone totally jacked my pipe. So I took a water bottle, made an aluminum foil dip for my bowl and put a hole and a carb at the bottom. Shit's pretty nifty.
 

stickyhits

Well-Known Member
I like making em out of the 32 ounce gatorade bottles its the perfect size for a monster without wasting alot of smoke any bigger and its to hard to clear
 

McDoobie

Active Member
I Recently Made 1 Outta A 12 fl oz Bottle Of Tea.
I Made A Hole In Tha Side Of It.
And Put A Straw From Sea World In It.
Big Samuu On Tha Straw :)
Then I Took A Stereo And Cut Out A Peice Of Tha Metal Speaker For A Screen.
Then I Took It Placed It On Top Of Tha Bottle,
And Bent It Down, And Wrapped It Tight With
Alunium Foil.
Then I Took Purple Duct Tape :)
And Wrapped Most Of Tha Bottle,
I Also Wrapped Over Tha Alunium Foil,
2 Keep Tha Screen From Falling Off.
But I Left Sum Of Tha Top Of Tha Bottle Untaped.
So I Can See Tha Smoke Wen I Suck :)
lmfao!!!
ahah
Its Tha Ghettoiest Pipe In Ganja Smoking History :)
 

i love you mary jane

Active Member
i made 1 outta a normal water bottle,took a black bic pen and chopped the end of both sides and got the PEN part out so there was just a shell,found some metal piece and put it on top of the pen and wrapped a lil' tin-foil around it,put a carb in and i was set to go,it hits pretty fuckin good
 

AzGrOw-N-sMoKe

New Member
well one time i took a empty bottle of ibprufren the 1000pill size....stuck a whole in the side took the empty stem of a plastic pen took the metal part of a pencil(the part that holds the eraser) heated up one end of the pen stuck the metal to it the i headted the small hole i made in the bottle anstuck the pen threw the hot plastic helped with sealing then i just put a little carb on the side...perfect little one hitter...i was 13 when i made that..lol...
 

Erniedytn

Master of Mayhem
We used to make gravity bongs. You cut the bottom off of a 3 litre bottle, fill up a 5 gallon water bucket, make a bowl out of foil for the 3 litre. Then you submerge the 3 litre up to its neck in the bucket, place the full bowl in its place, the put fire to it and pull up on the 3 litre. The whole bottle fills with smoke. You remove the bowl, put your mouth on the 3 litre and push it back down into the water inhaling as much smoke as possible. It was very rare that I could handle the whole thing.:hump:
 

AzGrOw-N-sMoKe

New Member
yea the old g-bong will get you fucked up....i bet if you try a little harder you can take the whole thing...at least thats what i told my wife:hump:
 

dew-b

Well-Known Member
use to make my bongs out of bamboo. then to protect them i would coat them in polyurethane. inside and out
 

stickyhits

Well-Known Member
We used to make gravity bongs. You cut the bottom off of a 3 litre bottle, fill up a 5 gallon water bucket, make a bowl out of foil for the 3 litre. Then you submerge the 3 litre up to its neck in the bucket, place the full bowl in its place, the put fire to it and pull up on the 3 litre. The whole bottle fills with smoke. You remove the bowl, put your mouth on the 3 litre and push it back down into the water inhaling as much smoke as possible. It was very rare that I could handle the whole thing.:hump:
I've blackedout from a gravity bong we use to fill it up then 2 people would spin you in an office chair while holding in the hit
 

Biznizz Hippee

Active Member
this isnt a bong but its a pretty good pipe...get an elbow joint pvc pipe, and get another peice to fit inside it and cut it about 2 inces long. glue it in with super glue and put some aluminum foil on the end of the elbow and push down till its about like a bowl for the screen. get a needle and poke holes in the foil and use electrical tape to keep the foil in place. do a lil finishing touches and voila u got a pipe. Hits really good but the only prob is the foil flaking of in youyr lungs.

and for gravity bongs put somwe rubbing alchohol in it...it hits hard as hell
 

Abraxas

Active Member
Ever see those gigantic orange round things on the road, not the road cones, but the big cylindrical ones? Ever try takeing the bottom off of one, takeing the flasher on top, and putting a bowl in the top? Ever try takeing that assembly and sticking it in a large round trashcan full of water, with a drain spout at the bottom and a reservoir to store the water? No? Try it. Your lungs will hate you in the morning!
 

cnl491

Well-Known Member
i made a crazy one it was 2 32 oz gatorade bottles, but half and a full one,,n between was a like an air pump..it looked like a little turbo charger..n it was between an by the carb...so wen u turned it on it shot the whole smoke into yyou..it was crazy..u be burping smoke hours after!!
 

GSTATUS

Well-Known Member
Ahhh last night i hit the sick homemade waterfall/gravity bong.
Took one of those huge containers of water and filled it up.....put the bowl on the top made everything airtight. Poked a whole on the bottom and put my finger on it then let go...sparked........wa..la
 

Erniedytn

Master of Mayhem
Ever see those gigantic orange round things on the road, not the road cones, but the big cylindrical ones? Ever try takeing the bottom off of one, takeing the flasher on top, and putting a bowl in the top? Ever try takeing that assembly and sticking it in a large round trashcan full of water, with a drain spout at the bottom and a reservoir to store the water? No? Try it. Your lungs will hate you in the morning!
Now that is some crucial ass shit dude:blsmoke:
 

jesus3

Well-Known Member
my craziest bong i made from new plumbing pipes and bowl from watering system.in the first tank i use water in second ice. this think blow me up after one hit.ooops forget,this bong is 30cm tall.peace.:peace::joint:
 

Attachments

Abraxas

Active Member
I made this other one that was a terrible idea. I took one of those small gas masks that you often see at headshops hooked to bongs. I had hooked one up to a bong long before I ever saw it in a headshop and Im convinced they stole my idea, but thats besides the point. The mini-plastic bong I have turns into a steam roller if you take off the bottom plug. I plugged the top into the gas mask, took off the bottom plug and strapped one of those turbocharger looking air mattress pumps into the bottom. BAD IDEA. It popped my ears and the pressure killed my head, my nose ears eyes burned etc. I did however get EXTREMELEY BAKED. I dont reccomend it though, it was kinda painful.
 
Top