hey guys heres how to make a Vaporizer out of a lightbulb say thx if u like
Use these steps and follow along with the pics and ull have made ur own in no time
1: Gather all materials
2:take lightbulb and remove small metal thing on the bottom of the bulb (be careful not to crack the bulb)
3. next remove the black part with a knife be gentle not to crack the glass use the knife to scoop it out it and dump it out.
4. next take the pen and break the inside of the bulb and use some needle nose pliers to pull out the glass. make sure u crack all the glass inside so none is exposed.
5. next pour some salt into the bulb to remove the white crap shake it around and dump out the salt.
6.cut the top of the water bottle and tape it to the screw on the bulb then use a lighter to melt the temp to form a air tight seal. check the seal by sucking the air from the lightbulb and making sure its airtight.
7.next take the bottle cap and make two holes 1 in the center and one smaller toward the edge.
8.take a pen and disassemble it take the shaft of the pen and put in in the center hole screw the cap on the bulb and ur done. now drop in some weed are vaporize away!!!!
the best part about it is it dosent stink!!! works perfectly give it a try!