View Single Post
  #2  
Old 08-09-2007, 01:01 AM
FilthyFletch's Avatar
FilthyFletch FilthyFletch is offline
Super Stoner
Mr. Ganja
 
Join Date: Jan 2007
Posts: 5,162
Gallery:
FilthyFletch is a name known to allFilthyFletch is a name known to allFilthyFletch is a name known to allFilthyFletch is a name known to allFilthyFletch is a name known to allFilthyFletch is a name known to all
Points: 16,473, Level: 18 Points: 16,473, Level: 18 Points: 16,473, Level: 18
Activity: 0% Activity: 0% Activity: 0%
Default

Ok this tutorial will give you the basics to build any system you want to fit your need.This little 6 site setup is perfect for a small grow area like a closet.Here are the basics you will need.I will show 2 methods of setting up the mister so pick which way you like and use and adapt it...

1 20 gallon rubbermaid tub with lid darker color is best no clear roughly $4
1 10ft 1/2 inch pvc pipe $ 1.67
4 1/2 inch pvc end caps $.28 each
2 1/12 pvc "T" $.38 each
1 1/2 inch threaded pvc "T" fitting $.45 each
1 can pvc cement $2.65 each
1 piece 1/2 hose about 1 foot is more then enough $1
1 1/2 inch threaded barb with 1/2 inch hose barb on opposite end ( $1.86)
6 3 inch net pots ( about $.40 each)
either 6 360 mister micro sprayers ($.65 each) or 1 2" pop up lawn sprinkler with 1/2 inch thread ($.6
1 submersible water pump 350 gph or bigger (varies in cost ebay good to buy from)

These items area your basics for the setup and can all be found at Home Depot or Lowes. Tools that you will need are few such as.....

1 drill
1 3 inch hole saw
scissors or razor knife
hack saw to cut pvc or other cutter
1 drill bit ( varys on misters you buy I used 7/32 for the red ones in this)
Reply With Quote
 
Page generated in 0.08604 seconds with 9 queries