i connected it under my sink, ran some tubing to the grow op. the blue and white fitting i took a picture of is a John Guest Angle Adapter Quick Connect (push-in) valve

it just allows me to push in a 3/8 poly tubing to run to the input of my RO system (yes that is a vanity type sink or whatever you call it...its wood so i just drilled a small hole so I can run tubing

this is the same bathroom, just up under the bathtub... if you look, you will see some clear tubing running on the ground, that is the input from the water supply under my sink i just mentioned, that runs out of the wall and to my RO system

in this picture you will also see my Quick Connect Saddle drain valves. One is for my RO system's drain line and the other is for one of my Aero system's drain line (i just turn on pumps and it drains itself, really nice perk easy on the back too) And whatever doesnt drain, i just use a siphon battery operated pump (you know those ones you use for kerosene heaters)



inside the RO....i have 2 ario aerator version 4, a float valve, a pump that is hooked to the hose to push the water through, and last but not least...i have my UV sterilizer. I know it may be overkill, but i've had some yucky experiences with water mold and all kinda stuff...so i keep a tight watch on my water now (i normally dont use air pumps because of them introducing spores and fluctuating pH and EC, but this is only RO water and whatever the air pumps germinate, my UV sterilizer will take care of




the blue tubing is hooked up to that white thing. the white thing is a float valve

you can drill holes and use bar stool rubber feet. they have worked great. i just drill a hole in them and run the wiring through.


LAST BUT NOT LEAST, a pic of the whole RO res unit

__________________
da fuck?