Marijuana Growing - View Single Post

epixbud · #1 10-08-2008, 08:41 PM

Well, cloner time! I needed a cloner with minimum 80 sites and maximum 120 sites, so I made it, well just the 80 holes for now and the rest later.
This guide shows how I did it, what I used and the results. It has all been done from research within Rollitup! Just bigger, well, more quantity I mean.

What you will need is :
2 – Under bed storage bins ($25 each)
1 – 10 gallon jug ($10)
1 – 264 gallon per hour pump ($50 ) ( had 185 first, not strong enough, changed up)
15’ – ½” poly tubing ($20)
5 – ½” 90 Digress Fittings ($1 each)
3 – ½” “T” Fittings ($1 each)
18 - #8 Misters (not sure, just small and red) ($4 each!) (had smaller ones first, no work)
1 – Can Plastic Paint Black ($6)
1 – Roll Foil Tape ($11)
1 – Tube Silicone ($4)
1 – 1 ½” 90 ($1)
40 – 2” x 1” Neoprene Grow Plugs ($50) (cut in half, don’t need then 1” thick!)
1 – 1 ¾” hole saw (leaves a perfect 2” hole!)