Cabinet
I decided to build my own cabinet as I wanted a fully contained unit(veg, flower, mother) and could not find one on the market. I used the SuperCloset, CoolCab, Bloom box, and all the DIY cabinets on ROI for inspiration. I think i have developed somewhat of a cabinet/grow room fetish ..lol
Outside View - The cabinets are Sandusky Elite. Each cabinet measures 36" x 24" x 78". I used the 4 shleves inside each one to cut-up with a plasma gun and utilize in the cab for duct/covers, particians etc....
Inside View
FatMat Insulation for sound dampening
Painted with Kilz 2 Primer and 6 coats of Kool Seal Elastometric Roofing Paint that is said to be 90%+ reflective. I originally used panda paper but did not like how sloppy it looked. This paint is like rubber, it is easy to clean and looks good. There are no gaps whats so ever that any uglies can hide and grow in.
w/panda
Panda removed and painted, notice how much cleaner.
Utility chamber close-up.
-Still need to clean it up.
-The Sentinial CHHC-1 CO2 controler had to be sent back as they had a recall. It should be sent back to me in 2-3 weeks.
Added door to util chamber
Close-up of Flower chamber with light all the way lowered. (will be used with 600MH to veg sometime too)
Light ventalation and carbon filter for the flower chamber. This pic was taken looking up at the light. Notice how the cabs are joined together as to not sacrifice height of my flower chamber. Both the can 33 and the cooltube light have their own 478cfm S&P inline fans on speed controllers.
Close-up of veg and mother chamber.
-The shelf on the right has 2 ft above and blow it to hold 3 mothers.
-That metal ducting on the right is where the 20lb C02 tank will go. The white "box" it is sitting on houses my intake ducting for flower and veg chambers. Intakes are 6" with back draft dampners to keep all smell, light, C02 for coming in when exhaust fan is off.
-Veg chamber has own can 2600 and 100cfm S&P inline fan.
This is high level overview, please ask any questions for on specefics as i have many close-up pictures and can explain. You can also visit by build thread linked in my signature text. I have made a few changes since then but the majority of the design is in there.
If anyone can offer any advice on any changes/mods needed it would be greatly appreciated.